Toes Elevated Deadlift
How to Do a Toe Elevated Deadlift | In-Depth Guide [VISUAL LEARNERS]
Proper Form & Common Mistakes | Home Resistance Training
VIDEO TUTORIALS HEREWRITTEN TUTORIAL + IMAGES BELOW
MAIN MUSCLES WORKED IN the Toes Elevated Deadlift
GLUTEUS MAXIMUS, QUADRICEPS, AND HAMSTRINGS
OTHER MUSCLES WORKED:
- Adductor magnus
- Erector spinae
- Quadratus lumborum
- Transverse abdominis
HOW Toes Elevated Deadlifts SHAPE OUR BODY
Tones and shapes buttocks, front and back of thigh.
WHAT WE'RE DOING TODAY
ALL WE'RE DOING:
A simple bending over at the hips and then standing up again.
This version of the Deadlift is an option for those who have difficulty doing a good hip hinge, those who tend to roll up onto the ball of the foot when at the bottom of the deadlift, or those who tend to use the muscles on the front of the thighs (quadriceps) to lift the weight. The toes are placed up on a very slightly elevated surface, even a small hand towel folded over to lift the toes ½-1 inch will work well. Elevating the toes shifts the center of the body’s weight back, making it easier to hip hinge and use the hamstrings to lift the weight.
People who have difficulty keeping their weight back when they hinge have to adjust and bend at the knees. When the weights are lifted the quadriceps will work to straighten the knees, instead of the hamstrings working to extend the hips. The toe-elevated version of the deadlift works well for training the proper form. Work on decreasing the height of the elevated surface, working towards standard deadlifts with a flat foot.
PROPER FORM: Toes Elevated Deadlift
EQUIPMENT, SETS & REPS
SUGGESTED STARTING WEIGHT FOR WOMEN:
10 -20 pounds in each hand.
SETS & REPS:
2 sets of 8 reps.
Slow and controlled. Can lift up quicker and lower more slowly.
BODY POSITION FOR THE Toes Elevated Deadlift
FEET/LEGS: Stand with feet hip-width apart. Ball of your foot up on an elevated surface. Legs straight, knees soft (not hyperextended or locked).
BODY STANCE: Spine (includes neck) in neutral, sternum lifted, shoulder blades in and down your back. Legs straight, knees soft (not hyperextended or locked).
ARMS/GRIP: One dumbbell in each hand at the front of your thigh. The thumbs pointing in.
HOW TO DO
HOW TO DO Toes Elevated Deadlifts
CUE: When lifting the weight, focus on your hamstrings and gluteus maximus pulling your hips back under your shoulders. To lower down, focus on pushing your hips back to hinge, so that your shoulders stay roughly over your knees while your hips move back. Keeping your spine in neutral.
Hinge forward at your hips. The proper depth of the hip hinge is when your hands are in line with your knee joints, and your hips are lower than your shoulders and higher than your knees.
Bend your knees, lowering the weights until they are approximately at mid-shin level - your hips should still be higher than your knees (but lower than your shoulders).
To begin the lift, the weights will be close to your shins and your weight should be over the arches and heels of your feet. Push down into the floor with your feet as you straighten your knees.
Once your hands are in front of your knees, pull your hips forward to bring them in line with your spine and legs. Straighten your legs and squeeze your glutes at the top. Keep your spine in neutral, shoulder blades down and in, and sternum lifted. Stack your shoulders over your hips and over your feet.
Hinge forward at your hips, and bend at your knees to lower down for the next rep.
HOW TO SAFELY GET OUT OF THE EXERCISE
Hip hinge until hands are at knee joint line, bend your knees to squat down to set the weights on the floor. Push up to standing.
WHAT TO AVOID WITH THE Toes Elevated Deadlift
Guess what? Good news! Many avoids are the same for most movements. Once you learn the basics, there's really only a few extra avoids for each individual movement.
1. Avoid Rounding Spine
AVOID: Avoid rounding the back.
- This is mostly just a habit developed from years of using your back to lift.
- This can also happen when you use too much weight. (This would be the crowbar example - or the fishing pole. You only can lift the weight without injury if the back muscles are strong enough to hold the back in a safe position.)
WHAT TO DO:
- Begin with no weight or lighter weight and just practice your form, add weight slowly.
- Keep your sternum lifted and your abdominals engaged to help keep your spine neutral.
2. Avoid Shallow Hip Hinge
AVOID: Avoid not hinging with hips far enough.
- Not hinging far enough could increase the strain on the shoulders and low back.
- May cause you to have to squat too far, using more quadriceps and less hip extensors.
WHAT TO DO:
- The hips should be between the height of the shoulders and the knees.
- The hands should be directly under the shoulders throughout the exercise.
- If you cannot hinge far enough forward because your hamstrings are tight - try stretching them before the exercise.
- If you still cannot hinge far enough forward - work on hip hinging before doing the deadlift.
3. Avoid Pelvic Tilt
AVOID: Avoid doing a pelvic tilt at the top of the movement when extending your hips.
- The goal of this exercise is to train the gluteus maximus and hamstring to pull the leg backward relative to the pelvis.
- Moving the pelvis is movement of the spine - this can irritate the joints and muscles over time.
WHAT TO DO:
- Do not make the mistake of substituting this movement of the pelvis for movement of the hip - the thigh bone in the socket of the pelvis.
- At the end of the hip extension, use the gluteus maximus to extend the leg in the socket of the pelvis but do not tilt your pelvis.
4. Avoid Pushing Hips Forward
AVOID: Avoid pushing your hips too far forward at the top of the movement.
WHAT TO DO:
- At the top of the movement, your back should be neutral, not arching.
- Sometimes people will push the hips too far forward so that the shoulders are behind the hips.
- Push the hips forward only until the shoulders are stacked over the hips.
5. Avoid Lifting Chin
AVOID: Avoid lifting your chin as you hinge.
- This can cause a neck strain.
WHAT TO DO:
- Remember that your neck is part of your spine.
- Deadlifts do strengthen the neck muscles when you lean over.
- Keep the entire spine in neutral to strengthen the muscles in the healthiest position.
- Looking slightly down during the entire range of motion may help to keep the neck in neutral.
6. Avoid Rolling Forward To The Balls Of The Foot
AVOID: Rolling forward onto the ball of the foot.
- This happens when you have tight calf muscles (gastroc, soleus).
- This can also happen if you have restrictions in the mobility of your ankle joints
- Work on lifting your toes up off of the floor when the foot is flat on the floor
- Do this in sitting when the knee is bent and in standing when the knee is straight.
- This can put too much strain on the knee joint.
- The quadriceps will do more of the work.
WHAT TO DO:
- Try stretching your calf muscles.
- Put a lift under your toes to get your weight back.
- Make sure the weight is close to your body and not pulling you forward.
- Set your weights on elevated objects (placed on the sides of your legs), so that you don’t have to bend down as far.
- Do Romanian Deadlifts until you have improved the flexibility of your ankles.
WHAT & WHY
BENEFITS OF TRAINING THE POSTERIOR CHAIN MUSCLES
TRAINING FOR SOMETHING WE DO EVERYDAY
There are 2 main ways we safely lift heavy things from the floor - squatting & deadlifting.
With both of these positions, the goal is to maintain a neutral spine, moving from the hips and knees not from the back, and having the load as close as possible to your body.
In both of these lifts the weight is lifted from a position close to the feet. When you lift from the floor the load needs to be close to your body. A squat requires more calf length (not tight), knee and hip range of motion and good core strength. Doing a squat with good form helps to work on all of this, but you will be limited in adding resistance because if you add resistance - first your form has to be perfect. If you are limited in these areas but you want to work on increasing your strength then the deadlift could be an option.
Deadlifts are basically lifting a heavy object from the floor. It is a movement that we do all day long lifting children and other heavy items like groceries and laundry. The exercise begins with hinging at the hips. The core muscles are working to hold the spine in neutral. Once the hips are hinged forward, the weight is lifted up using the leg muscles. A benefit of the deadlift is that with good form you should be able to lift quite a bit of weight. What this means is that you might want to eventually invest in some heavier dumbbells or a heavy kettlebell for these. We have 3 very large sets of muscles (quads, hamstrings & glutes) helping out in this exercise (and remember there's 2 of each!) so they can move a lot of weight working all together. And you are not working them through a very big range of motion.
Additionally, it is much easier to do a deadlift than a squat with correct form - easier to keep the spine in neutral because the hip flexion is not as great as a squat. And the muscles are at a length where they are stronger (length-tension curve). Making it a good choice for really working the muscles of the arms, core, and legs. But, it is essential to lift the heavy weight with proper form to avoid hurting your back.
IT’S ALL ABOUT THE HIP HINGE
The main movement in this exercise is hip hinging, leaning over from the hips (where the hips crease) and then using the hip extensors (gluteus maximus and hamstrings) to straighten the hips/stand back up. It seems like a simple movement but it is often performed with very poor form. Many people bend their backs instead of hinging at the hips. With this approach, the back muscles are trying to lift the heavy weight instead of the larger and more powerful leg muscles, this form can end up really straining the low back.
WHY DO WE EVEN CARE?
STRONG BACKSIDES = HEALTHY BACK, HIPS & KNEES
Strong hamstrings and glutes are needed to keep the back, hips, and knees healthy. They work with all of the other muscles of the core and legs to keep the joints aligned and cushion the impact, and they do this while we move our bodies in various ways and with various amounts of weight or resistance.
FOCUS ON CREATING STRONG, POWERFUL STRIDES & LOWER BODY MOVEMENT IN EVERYDAY LIFE
Hamstring exercises often focus on movements that bend the knees, like hamstring curls, to target the hamstrings. The problem with this is that one of the important jobs of the hamstrings is to pull the hip back (extension) - this is when you go from for instance standing, to taking a step forward, the trailing leg/back leg, is now in “extension” - from the hip joint, your leg is behind you. In fact this function is how we use our hamstrings most throughout the day - for walking, running, getting up from a chair, and climbing stairs. Deadlifts are a really good way to train the hamstrings in coordination with the gluteus maximus to pull the hip back from a bent position.
In order to lift properly we need 1). strong legs, 2). core strength to stabilize the spine in a neutral position, and 3). mobility in our hips.
Learning how to do deadlifts with proper form will help us with the first two:
build the leg and core strength needed to improve the way that you lift during your daily activities. Good posture and body mechanics, along with strong leg and core muscles and joint mobility will lessen the damage to the joints of the lumbar spine and hips from degenerative changes that occur with age.
LEARN PROPER BACK POSITION WHEN LIFTING STUFF WITH THIS EXERCISE
Chances are good that you will experience back pain at some time in your life. It makes sense to learn to use the body as it is designed to be used. The legs are designed for strength and power.
The back is designed to keep us upright and to provide a base of support for the legs and arms to move from, the back is not designed for heavy lifting. The back plays more of supportive stabilizing role in heavy lifting, like with the deadlift, the legs are doing the standing back up with the heavy weight, and the back and arms are working in a supportive role to stabilize oneself while holding that heavy weight.
Learning the correct way to lift heavy items from the floor, and strengthening the leg muscles can help to prevent back injuries and damage to the small joints of the spine that can happen due to poor lifting technique. One key to keeping your back healthy is to keep your legs strong so they can do the heavy lifting, decreasing the strain on the back.
This is an excellent exercise when it is performed correctly but can cause back injury when the form is incorrect.
*** special caution with osteoporosis, spondylolisthesis, spondylolysis or history of disc pathology.
EVERYDAY LIFE &
HOW WE USE OUR POSTERIOR CHAIN MUSCLES IN EVERYDAY LIFE
1. STRAIGHTENING (EXTENSION) THE HIPS AND KNEES
- Standing from a sitting position
- Walking up stairs
- Lifting an item off of the floor
- Climbing a ladder
- Walking uphill
- Getting up from the floor
SPIFFILICIOUS FACTS ABOUT MUSCLES & MOVES
The legs are designed for strength and power. What shows us this is the case? The design of the muscle - the shape, orientation, location - origin and insertion points, size (length and bulk), and muscle fiber type. Take the quadriceps muscle for example - all four muscles join at a shared tendon which has the patella embedded in it. The patella acts as a pulley system - making the muscle capable of very large forces.
Compare that with the erector spinae - which is really a lot of different sections of muscle that attach on the vertebrae spanning a few segments at a time - they are fairly short muscles and they overlap from the neck to the pelvis - the layer upon layer provides support, not a lot of movement - especially at each individual segment, and the muscle type is more aerobic - designed for endurance, they can’t handle the heavy lifting.
Bending forward at the spine and lifting heavy items, especially if you are slightly rotated during the movement, can lead to damage to the discs in the spine. Why is this? It has a lot to do with the design of the discs -the way the collagen fibers of the discs are arranged in a crisscross pattern with the bottom part attached to the vertebra below. When you rotate only half of the fibers will become taut, and the other half (which are oriented diagonally in the other direction) will be relaxed. This provides only 50% of the structural support, making it more vulnerable to injury.
1. The position stretches some of the supporting ligaments to their end range, there is a weak area in the back on each side. Bending compresses the discs in the front and causes the nucleus to be pushed to the back - pushing it back toward the weak area. This is how a herniated or bulging disc occurs.
2. There are two facet joints which are made up of the small bony protrusions off of each vertebra - for example, L4 and L5 both have little bony parts sticking off of the sides of the vertebrae - these for the facet joints between L4-5. When you rotate you lock out the joint - where the joint is most compressed. It is easier to irritate the joint in this position.
The back is designed to keep us upright and to provide a base of support for the legs and arms to move from, the back is not designed for heavy lifting. So the back plays more of a supportive stabilizing role in heavy lifting then- like with the deadlift, the legs are doing the standing back up with the heavyweight, and the back and arms are working in a supportive role to stabilize oneself while holding that heavy weight.
Kind of like using a lever to lift something - you put a crowbar under something and push down on one end. The spine is like the crowbar. If it was not strong enough to lift the support the object as you push down with your arm then it will bend, or break.
ALLLL MUSCLES & WHEN
ALL MUSCLES WORKING & WHEN DURING THE Toes Elevated Deadlift
The hand and arm muscles stay active throughout the exercise to hold the weights.
The hamstrings, gluteus maximus and adductor magnus work eccentrically to hinge forward at the hips and move the torso from vertical towards horizontal. The back extensors become more active with more forward lean of the trunk. With the weight in front pulling you forward, the gastroc and soleus become more active to prevent the ankle from moving into dorsiflexion.
The quadriceps and gastrocnemius work eccentrically to control the weight of the body as the knees and ankles bend to lower the weight to mid shin.
The quadriceps and gastrocnemius contract concentrically to straighten the ankles and knees to push back up to standing. The hamstrings, gluteus maximus and adductor magnus contract concentrically to lift the weighted torso by pulling the hips back to neutral and to standing.